Kutheni ukhetha le laser photocell ephuculweyo YET611LSR-V2.0 ?

YET611LSR-V.20Isivamvo seLaser Photocell eReflective yifotocell ephuculweyo ukusuka YET611LSR photocell. Umahluko phakathi kwezi zimbini iinguqulelo photocell ngumgama YET611-V2.0 unokusetwa nge dip switch.

Uyakwazi ukuseta imigama ukuba 2meters,3meters,4meters,5meters,6meters,7meters okanye 7.5meters. Ngaphandle koko, unokuseta umgama ngokuhambelana neemfuno zakho, okoko nje useta umgama phakathi kwe-0.3 yeemitha kunye ne-7.5 yeemitha.

Imiyalelo yokuSebenza kweMveliso

Amandla kwimveliso, emva kokuba isalathisi samandla kunye nesalathisi sesimo sivutha ngamaxesha e-3, isalathisi samandla sihlala sihlala, isalathisi sesimo sivaliwe, kwaye i-buzzer yenza i-beep emfutshane, ebonisa ukuba ukuqaliswa kwe-boot kuphumelele;

Ukucwangcisa umgama: 【Ezi ndlela zimbini zilandelayo zinokugqibezela ubumbeko lomgama, umsebenzisi unokukhetha indlela efanelekileyo ngokweemfuno zokwenyani zesicelo】

Indlela yoLungiso lomgama osisigxina

(1) Imveliso ibeka umgama ngokutshintsha kwikhowudi yokudayela yoqwalaselo. Ngalo lonke ixesha ikhowudi yokudayela yoqwalaselo isetyenzisiwe, isalathisi samandla siya kubetha ngokukhawuleza amaxesha ama-3 kwaye emva koko sikhanyise ngokuqhelekileyo, esibonisa ukuba ukusetwa kuphumelele;

(2) Jonga kwitheyibhile engentla yolungelelwaniso lwediphu ngokunxulumene nomgama.

Indlela yoLungiselelo lomgama onganyanzelekanga:

(1) Faka imowudi yokuseta umgama: Emva kokuba imveliso inikwe amandla kwaye yaqaliswa ngempumelelo, ngaphakathi kwemizuzwana eli-10, umsebenzisi usebenzisa ikhaka ukuvala umgama ukusuka kwimveliso (ngaphakathi kwe-0.5m) umva naphambili amaxesha ama-5, de kube buzzer " beep-beep-beep", ngenisa imowudi yokuseta umgama;

(2) Ukukhanya kwamandla kuya kukhanya ngokuqhubekayo kwaye ngokukhawuleza, kubonisa ukuba imveliso ingene kwimeko yokufumanisa imiqobo;

(3) Lungisa indawo yemveliso ukuze imveliso ibe phakathi koluhlu lokubona olufunwa ngumsebenzisi; unako kwakhona ukuphulaphula inani lamaxesha amakhonkco e-buzzer (ukukhala okucothayo: imitha eyi-1 / amaxesha, ukukhala ngokukhawuleza: i-0.5 yeemitha / amaxesha) ukuzimisela kwangaphambili komgama phakathi kwemveliso yangoku kunye nomqobo; 

 (4) Xa usiva isandi ende se-buzzer, isalathisi samandla (ukukhanya okuluhlaza) sidanyaza kancinane amaxesha ama-3 kwaye emva koko sihlale, sibonise ukuba ubumbeko lomgama luphumelele, kwaye luphuma kwindlela yokumisa umgama;

(5) Xa ufuna ukuseta kwakhona umgama omtsha wokubhaqa, nceda uvule kwakhona kwaye uphinde la manyathelo angasentla. 

Le laser photocell ekhanyayo ayixhasi kuphela i-AC9V ukuya kwi-AC24V kodwa ikwaxhasa i-DC9V ukuya kwi-DC30V. Ukusebenza kwayo ngoku ngu-≤80mA@12V (Imax =150mA), kunye nenkcitho yamandla:≤0.96W. Ixesha lokuphendula ngu ≥ 100mS.Kukho i-GND/AC、VCC/AC、NO/NC、COM ujongano lwale photocell. Uhlobo lweMveliso yeMveliso yiRelay isiphumo soqhagamshelwano esomileyo (NO / NC Ukukhetha nge-jumper yemveliso)

Isibonakaliso sokukhanya kwe-LED

Ukukhanya kwe-LED okuluhlaza: 1) Isetyenziselwa ikakhulu ukubonisa imeko yombane kwimveliso; 2) Isetyenziselwa ukubonisa indlela yokumisela umgama kunye nokutshintsha indlela yokusebenza;

Isibane se-LED esityheli: Isalathiso sophawu lwesimo sokusebenza (Vuliwe/Valiwe: cima xa kukho umqobo/ukukhanya kukhanya xa kungekho mqobo.)

Ngentla zinkcukacha endingathanda ukwabelana nawe ngazo nge-laser yethu yamva nje yefotocell, ukuba unomdla kule foto cell nceda ungathandabuzi ukwenza iodolo!

• Unyakakelwe
  --
• Uhlobo lweshishini
  --
• Ilizwe / Ingingqi
  --
• Ishishini eliphambili
  --
• Iimveliso eziphambili
  --
• Ishishini lomntu osemthethweni
  --
• Abasebenzi bazonke
  --
• Ixabiso lokuphuma lonyaka
  --
• Ukuthengisa ngaphandle
  --
• Abathengi abasebenzayo
  --