Yet Remote Control Manufactory specialized in wireless remote control with 19 years of experience.
Language
Yet Remote Control Manufactory specialized in wireless remote control with 19 years of experience.
Product Specifications:
Input voltage : AC: 9V~ 24V (AC Frequence: 50HZ/60HZ): DC: 9V~30V
Working current : ≤80mA@12V （Imax =150mA），
Power consumption：≤0.96W
Sensing distance : 0.3m~ 8m@reflectivity (10%-90%)
Reaction time : ≥ 100mS
Ambient light resistance : Max.70Klux
Signal reception angle : 2° Product output interface : GND/AC、VCC/AC、NO/NC、COM
Product output type : Relay dry contact output (NO/NC is selected by product jumper)
LED light indication:Green LED light: 1) It is mainly used to indicate the power-on status of the product; 2) It is used to indicate the distance setting mode and working mode switching;
Yellow LED light: working status signal indication (On/Off: light off when there is an obstacle / light on when thereis no obstacle.)
Product Size(L*W*H) ：100 * 40 * 35mm
Product standard ：One photocell sensor, one manual, one hood (optional)
Productinstallation：
When debugging and installing,make sure that there are no obstacles within the set sensing distance;
When installing the product,try to avoid direct sunlight;
The minimum height for product installation is 1 meter,and it is recommended to be greater than 1 meter;When setting the sensing distance of the product,it must be more than 0.3 meters;
Do not power up the sensor until all electrica lwiring to the sensor has been completed;
