The duplicator procedures of the fixed code & simple rolling code:
1. Press & hold the 3rd button, meanwhile press the 2nd button 3 times quickly.
2. Release both buttons. Now the RED LED emits a short flash every 2 seconds
3. Place the original remote control next to duplicator around 5cm
4. Keep pressing the button of the original remote control and wait for a change flash (as a faster flash) of duplicator RED LED and a change of its color (BLUE) that confirms the correct learning of code. This step may take a few seconds and during that the color LED is RED.
5. While the BLUE LED is flashing, press the button of the duplicator where you want to program the code just learnt, and retain pressed until the LED switches off . This step may take some seconds.
6. The copy has been happened with success. Repeat the duplication from step 1 to the rest buttons.
Any interest to test this model? Pls feel free to contact us.