Yet Remote Control Manufactory specialized in wireless remote control with 19 years of experience.
Language
Yet Remote Control Manufactory specialized in wireless remote control with 19 years of experience.
The RM433 remote controller is an advanced version for 4-button RF with 433mhz remote programming. Designed with 8 buttons to perform various functions in running on different types of devices. Such as fan speed adjustment, brightness setting, etc.The simple and stylish look gives any surface beautiful decor when it is stored on the wall. It can be paired to control Sonoff RFR3, 4CHProR3, and other devices supporting 433 communication protocol. Pairing with your devices is extremely simple and takes no time at all, simply press any button on the remote controller to pair with the device you need to control.
Features of reset 433mhz remote control:
Remote Control - Used to control the connected devices remotely
Powerful Compatibility - Suitable for BASICRFR3, 4CHProR3, and other devices supporting 433 communication protocol
Easy to Pair - Press any button to pair with devices
Sleek & Modern - Simple white appearance makes it a beautiful decor for any wall surface
What is 433MHz remote control used for?
433mhz remote reset is a wireless radio band on which compatible household devices send signals. While TVs use infrared light for handling remote control signals, 433 MHz radio waves enable communication with home devices such as motorized blinds, sensors, or socket switches.
The RF communication and the basic setup of RF transmitter and receiver. These standard 434 MHz RF modules have a data rate of 1Kbps to 10Kbps. They can operate over a distance of 50 to 80 meters without any antenna.The performance at 433 MHz is used as a baseline for range test characterization between 315MHz and 916MHz. From this, one can gain an idea of how much line-of-sight range to expect depending upon the frequency of operation and the operating environment.
Why is 433MHz remote control so popular?
433mhz rolling code remote is a pair of electronic RF transmitters and receiver modules used to send and receive radio signals between any two devices. The data is sent by the transmitter module from the transmitter end, and it is received by the receiver module at the receiver end.
These modules are very popular among hobbyists and makers, primarily because of their price, which is very affordable, and simplicity of use. They are mainly used for short-range communication, which depends on the transmitter voltage, the antenna, and the RF noise at 433 MHz frequency in your area.
How to optimize the 433MHz remote control range?
In addition to the correctly selected RM433 remote control and the prevention of interference sources, the location of the receiver and antenna is very important for the range. Therefore, keep the following points in mind to optimize the range of your system:
In case of multiple receivers, place them at least 50 cm apart.
Never place the receiver or antenna directly against or on a metal object, at least 50 cm away from it.
Mount the receiver or antenna a maximum of 3 to 4 metres above the working level; higher or lower than the working level reduces the range.
Place the receiver at least 50 cm away from motors or other equipment capable of generating a force field.
Never place the receiver with antenna in a control cabinet, cabin or similar (metal) housing.
If the receiver has to be placed unfavourably, the antenna can usually be mounted in a different location by means of an antenna extension cable.
If possible, ensure that there is a line-of-sight connection to the receiver during operation. (check picture 6).
In applications where work is carried out at the same height, such as winches or shaft control, it is best to mount the receiver and antenna vertically.
In applications with large differences in height, such as in elevator technology, it is sometimes better to mount the receiver with the antenna positioned horizontally.
How to reset 433mhz remote?
ATTENTION: Clear all the remote control on the receiver means all should reset
Press Button S1 or S2 on the receiver and Hold until the Learn LED lights off. by doing this, all remote control stored in the receiver will be cleared.
