Yet Remote Control Manufactory specialized in wireless remote control with 19 years of experience.
Language
Yet Remote Control Manufactory specialized in wireless remote control with 19 years of experience.
YET870-V2.0 is a smart garage door controller that can drive dual motors. The controller has rich interfaces and strong applicability! The main applications of the products are swing-arm door opener and in-ground swing door opener.
The working voltage of this door controller is 24VAC,mainly used for 24VDC、120W @24VDC motor.The maximum remote control capacity is 100 keys.It has a digital tube display, which is convenient for function and parameter configuration.
It supports both dual door control and single door control.
The method and steps of learning and clearing the code are as below,
For Learning,
Dual Door Control Learning
Long press the "C" button on the controller (more than 2 seconds)until the tens and ones decimal points of the digital tube light up at the same time then release the button; at this time, press any key on the remote control until the decimal point in both the tens and the ones of the digital tube goes out at the same time, indicating that the learning is successful.
Single Door Control Learning
Long press the "C" key on the controller (more than 2 seconds),
release the key until the decimal point of the tens and ones of the digital tube light up at the same time, then short press the "C" key, The decimal point of the ten digit of the digital tube goes out.At this point, press any key on the remote control until the decimal point of ones digital of the digital tube is off, indicating that the learning is successful.
For clear code
Long press the "C" key on the controller (more than 8 seconds), until the decimal point of tens and ones digits of the digital tube are on, then off, the controller will automatically clear the contents of the memory. To reuse, just learn it again.
I will introduce two other function of this controller as below,
Model selection function(G6-G7)
Press the "P" key in the F0 menu to enter the model selection mode;
Short press the "P" key to display G6 -> press the "+" or "-" key to set the model(G6-G7),long press the”P” key for 2 seconds to save and return to standby mode.
When G6 is selected: the model selection is 600 model, which matches the 600 swing-arm door opener;
When G7 is selected: the model selection is 730 model, which matches the 730 buried door opener.
Working mode setting function of external manual control(H1-H3)
Press the "P" key in the G6 menu to enter the manual control working mode setting;
Short press the "P" key to display H2 -> press the "+" or "-" key to select single and double doors (H1-H3), long press the "P" key for 2 seconds to save and return to standby mode.
When H1 is selected:
When manually controlling the OPEN button: dual open --> dual stop -->dual open
When manually controlling the CLOSE button: dual close --> dual stop -->dual close
When H2 is selected:
When manually controlling the OPEN key: dual open --> dual stop -->dual open
When manually controlling the CLOSE key: single open --> single stop -->
When H3 is selected:
Turn on the automatic door closing function:
When manually controlling the OPEN button:there is door opening function only.
Turn off the automatic door closing function:
When the OPEN key is manually controlled: dual open -->dual stop --> dual open.
When the CLOSE key is manually controlled: dual close --> dual stop --> dual Close.
Above are the detail of YET870-V2.0 swing gate controller automatic dual arms swing gate controller I would like to share with you.If you are interested in this controller and want to get more information，please feel free to contact us.
