This YET480PC-2 dual-channel wireless smart controller is perfectly suited for wireless retrofitting of garage doors, yard gates, lighting fixtures, and electric equipment. It is compatible with the vast majority of remote control codes on the market, allowing for retrofitting without replacing existing equipment, achieving low-cost wireless remote control.
The entire unit uses the universal 433MHz standard frequency band, supports AC/DC 9-24V wide voltage power supply, and has an industrial-grade temperature tolerance of -20℃ to 80℃, ensuring stable operation for both indoor and outdoor equipment. It boasts ultra-high receiving sensitivity ≥-105dBm, ensuring smooth long-distance remote control signal reception. Dual-channel independent relay dry contact outputs, with a maximum current carrying capacity of 5A per channel, can store 1000 sets of remote control buttons, making it easy for multiple households and multiple remote controls to share.
Compatible with three major remote control encoding methods: fixed code, learning code, and rolling code. Adaptable to mainstream chip remote controls such as 2262, 1527, and HCS301. Directly pairs with the vast majority of electric door and lighting remote controls on the market, eliminating the need for additional dedicated remotes. Only blank, uncoded 2262 series remotes are incompatible, offering maximum versatility.
Four output modes are easily switched with a jumper cap to meet the needs of different devices: no jumper cap for inching pulse output; inserting 3-4 jumper caps provides a 3-second delay; 1-2 jumper caps provide self-locking continuous operation; inserting two sets of jumper caps simultaneously enables two-way interlocking, suitable for garage doors, roller shutters, lighting, access control, and various other scenarios.
Simple and easy to use: short press the corresponding learning button, the indicator light will illuminate, then press the remote control button; the light will flash three times quickly to indicate successful pairing. If the remote control is lost, press and hold the learning button for more than 6 seconds to clear the entire code library for the channel, ensuring safety and peace of mind. The two relays are independent and separate, with standard NO/COM/NC terminals, making the wiring clear and allowing even beginners to quickly install and debug. It is a cost-effective and preferred accessory for wireless upgrades of automated equipment.