Yet Remote Control Manufactory specialized in wireless remote control with 19 years of experience.
Language
Yet Remote Control Manufactory specialized in wireless remote control with 19 years of experience.
YET205B-630 is a superheterodyne receiver module with decoding function , has good cost performance, perfect anti-static protection and high reliability, which is widely applied to door access system, vehicle-mounted system, security, industrial control, communications and other fields. It is an ideal option for a demanding system used in complicated environment.
Its voltage is DC 3.3-5v. It can work well under -30℃-+80℃.The External dimension is 34x21.6x5mm. There are momentary mode, toggle mode and latch mode for your choice. About Output signal: four-circuit data and one-circuit signal indication are optional.Its Working frequency is 315MHZ or 433mhz(special frequency can be customized).And it can decode learning code (Ev1527), fixed code (Pt2262) and rolling code(HCS301) .
Product Pin Description，
1.VCC is Positive power
2.LEARN means External connection for learning button (can be used as a learning button by connecting an external button to the ground )
3.VT is Signal indication, high level is output when the signal of the remote control is received.
4.D0 is D0 Way output
5.D1 is D1 Way output
6.D2 is D2 Way output
7.D3 is D3 Way output
8.GND means Negative power
Setting of the Operation Mode
Signal momentary: S & L disconnected
Signal toggle: jumper in S, L disconnected Signal
latch: jumper in L, S disconnected
Before used, YET2305B-630 should be docked with remote control.
The learning method for learning and fixed code remote control is different from the method for Rolling Code remote control.
For Fixed Code and Learning Code，Press LEARN button on the YET205B-630, release it until LED light turns on and YET205-630 in learning state(at this moment the LED light turns off). Then press any key of the remote control, turn off the LED light when it flashes for 3 times and it indicates that learning has been done. It can learn about as much as 20 pieces of Remote control of the same mode. If Remote control is lost and wanting to make it invalid totally, press "Learning" button (more than 8s) until LED goes out, then Receiver will eliminate all contents automatically. If want to reuse it, just learning one more time again.
For rolling code，Press LEARN button on the YET205B-630, release it until LED light turns on and YET205-630 enters learning state(at this moment the LED light turns off). Then press any key of the remote control, release the remote control button until the LED light is long on,at this moment the LED lights turns off and once again press any key of the remote control, turn off the LED light after it flashes for 3 times and it indicates the learning has been down.
It can learn about as much as 6 pieces of Remote control of the same mode.
Above are the information for the YET205B-630 receiver module I would like to share with you.It really has very wide range of application scenarios ,Garage door and gate opener; Wireless security alarm system; Wireless doorbell;Remote keyless entry; Wireless controller and so on.So it is welcomed by customers. If you are interested in this receiver module,please feel free to contact us to get more details or to place an order.
